AUMA SAVEx Series - Page 3

305.2.3. Fieldbus cables: connect
315.2.4. Terminal compartment: close
325.3. KES electrical connection
335.3.1. Terminal compartment: open
345.3.2. Cable connection
355.3.3. Fieldbus cables: connect
365.3.4. Terminal compartment: close
375.4. KT/KM electrical connection
385.4.1. Terminal compartment: open
395.4.2. Cable connection
415.4.3. Fieldbus cables: connect
425.4.4. Terminal compartment: close
435.5. External earth connection
445.6. Accessories for electrical connection
445.6.1. Actuator controls on wall bracket
445.6.2. Parking frame
466. Operation................................................................................................................................
466.1. Manual operation
466.1.1. Engage manual operation
466.1.2. Manual operation: disengage
476.2. Motor operation
476.2.1. Local actuator operation
486.2.2. Actuator operation from remote
486.3. Menu navigation via push buttons (for settings and indications)
496.3.1. Menu layout and navigation
506.4. User level, password
506.4.1. Password entry
516.4.2. Password change
516.5. Language in the display
526.5.1. Language change
537. Indications..............................................................................................................................
537.1. Indications during commissioning
537.2. Indications in the display
547.2.1. Feedback indications from actuator and valve
567.2.2. Status indications according to AUMA classification
577.2.3. Status indications according to NAMUR recommendation
597.3. Indication lights of local controls
607.4. Optional indications
607.4.1. Mechanical position indication via indicator mark
607.4.2. Mechanical position indication (self-adjusting)
618. Signals (output signals).........................................................................................................
618.1. Status signals via output contacts (digital outputs)
618.1.1. Assignment of outputs
618.1.2. Coding the outputs
618.2. Analogue signals (analogue outputs)
629. Commissioning (basic settings)...........................................................................................
629.1. Type of seating: set
639.2. Torque switching: set
649.3. Limit switching: set
3
SAVEx 07.2 – SAVEx 16.2 / SARVEx 07.2 – SARVEx 16.2 Control unit: electronic (MWG)
ACVExC 01.2 Non-Intrusive Modbus RTU Table of contents