AUTEC Air series - Cable Control

LIUSK8B00_eng-01AUTEC
31
8.15 Cable control
The cable control is used:
- in particular working conditions, e󰘵ablished by the Machine Manufacturer
- when it is not possible to e󰘵ablish a radio link between the Radio Remote Control Units,
- when working in environments where it is not allowed to work via radio frequency,
- when a fully charged battery is not available.
ATTENTION: The use of the cable control entails risk of electric shock when
working near overhead or underground power line's cables.
8.15.1 Description
The cable control connects the Transmitting Unit to the Receiving Unit through a cable that
replaces the radio link. The cable shall be plugged in the suitable connectors, one on the
Transmitting Unit and the other on the Receiving Unit (or placed where e󰘵ablished by the
Machine Manufacturer).
When using the cable control, the working features (e.g. the meaning of actuators and the Data
Feedback function) do not change.