50
4.5 Starting Charging
1. Remove the connector from the holster.
2. Plug the connector into the EV charging port.
3. Choose one of the following ways to start a charge session:
— Use the Autel Charge app by tapping Start on the Charging screen.
— Tap your RFID card on the RFID reader.
— If the Auto Start function is enabled in the Autel Charge app, the charger will automatically
start charging once the connector is properly connected.
— If you have set a charging schedule in the Autel Charge app, the charger will initiate a charge
session automatically as scheduled.
— If the charger has a display, tap on the touchscreen and authorize charging via QR code or
RFID card.
NOTICE
Ensure that the EV is charging. If charging issues persist, try reconnecting the
connector or contact Autel technical support.
NOTE
Assurez-vous que le VE est en train de se charger. Si vous pensez que le véhicule
ne se charge pas correctement, essayez de rebrancher le connecteur ou contactez
l'assistance technique d'Autel.
To Next Page
Loading...
