Autel MaxiCharger AC - Stopping Charging

51
4.6 Stopping Charging
NOTICE

If the connector is unplugged from the EV during a charge session, the
charger will
automatically disconnect the power supply. This stops all
charging operations.
 When the vehicle is fully charged, the charger will automatically disconnect
the power supply.
NOTE
 Si le connecteur est débranché du VE pendant une session de charge, la
borne de recharge déconnecte automatiquement l'alimentation électrique.
Toutes les opérations de charge sont alors interrompues.
 Lorsque le véhicule est complètement chargé, la
borne de recharge
déconnecte automatiquement.
1. To stop charging, choose any of the following ways:
— Wait for the charge session to end and no further actions are required in the case of
scheduled charging or Auto Start.
— Tap the Stop button on the Charging Screen of the Autel Charge app.
— Tap the RFID card on the RFID reader.
— If the charger has a display, tap Stop on the Charging Screen.
2. Unplug the connector from the EV and return it to the holster.