EasyManua.ls Logo

Autel MaxiCharger - User Manual

Autel MaxiCharger
78 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
MaxiCharger AC Wallbox
Installation and Operation
Manual
Version 3.0
Europe

Other manuals for Autel MaxiCharger

Questions and Answers

  • J
    Jason HuffSep 9, 2025
    How to fix Autel MaxiCharger Battery Charger Bluetooth module communication failure?
    • G
      Gordon SmithSep 9, 2025
      If the Autel Battery Charger experiences a Bluetooth module communication failure, ensure Bluetooth is enabled on your mobile device and the charging station is powered on. Forget the charging station in your device's Bluetooth settings and pair it again. If the problem persists, contact your local representative.
  • A
    Angela MillerSep 12, 2025
    What to do if Autel MaxiCharger update fails via Bluetooth?
    • S
      Scott ClarkSep 12, 2025
      If the Autel Battery Charger update fails via Bluetooth, ensure the charging station is in idle status and that the Bluetooth connection is working properly. If the problem persists, contact your local representative.
  • P
    pgonzalesSep 14, 2025
    What to do if I lost my Autel MaxiCharger charge card?
    • H
      Henry GreenSep 14, 2025
      If you lose your Autel Battery Charger charge card, go to Account > Charger > Charge via Card to delete your card to avoid fraudulent use. Note that five charge cards can be bound to your account at most.
  • S
    scott81Sep 16, 2025
    What to do with unused 485 communication cables on Autel MaxiCharger Battery Charger?
    • S
      sroblesSep 16, 2025
      If the 485 communications cables are not needed to the distribution box of Autel Battery Charger, use electrical tape to coil the 485 communications cables respectively.

Summary

Safety Information

General Safety Warnings

Provides crucial safety instructions for installation and operation of the MaxiCharger.

Installation Guide

Wiring Diagrams

Provides schematic diagrams for connecting MCB, RCD, and emergency stop for different kW models.

Installation Steps

Covers prerequisites, unpacking, preparation, mechanical mounting, power supply wiring, and internet connection.

Protective Devices

Specifies required upstream protection devices like RCD and MCB for safe installation.

Operation Guide

Stopping Charge Session

Explains how to properly end a charging session for both cable and socket models.

Troubleshooting and Specifications

Troubleshooting Table

A comprehensive table listing common problems and their corresponding solutions for the MaxiCharger.

Autel MaxiCharger Specifications

General IconGeneral
Max Output Current50A
Mounting TypeWall, Pedestal
Operating Temperature-30°C to 50°C
Network ConnectivityWi-Fi, Ethernet
ProtocolsOCPP 1.6J
Protection FeaturesOvervoltage, Overcurrent, Short Circuit, Overheating, Ground Fault

Related product manuals