18
N415A
The System Features Learn Routine dictates how the unit operates. It is possible to access and change any of
the feature settings using the valet/program switch.
To enter the System Features Learn Routine:
1. Open a door: The GREEN wire, H1/5, or the VIOLET, H1/7 must be connected.
2.Turn the ignition on, then off: The YELLOW wire, H1/9 must be connected.
4. Select a feature: Press and release the valet/program button the number of times corre-
sponding to the step you wish to change. For example, to access the third feature, press
and release three times. Then press the button once more and HOLD it. The siren will
chirp the number of times equal to the step you have accessed.
5. Program the feature: While holding the valet/program button, you can toggle the feature
on and off using your factory remote transmitter. Pressing the button that locks the doors
will select the one chirp or default setting. Pressing the button that unlocks the doors, will
select the two chirp setting.
NOTE: The valet pulse count feature (8) has five possible settings. Pressing unlock will
toggle through all the possible settings.
6. Release the valet/program button.
SYSTEM FEATURES LEARN ROUTINE
To Next Page
Loading...
Need help?
General
