19
N415A
System Features Menu:
Step One Chirp (Default) Two Chirps
1 Active arming Passive arming
2 Audible arm/disarm confirmation on Audible Arm/disarm confirmation off
3 Siren duration 30 seconds 60 seconds
4 Instant door trigger Delayed door trigger
5 Door trigger error chirp ON Door trigger error chirp OFF
6 Sensor shunt zones 2 and 4 All zones
7 Panic enabled Auxiliary output enabled
8 No function No function
9 Valet switch input: 1 pulse Valet switch input: 2-5 pulses
Once the feature is programmed:
• Other features can be programmed.
• The Learn Routine can be exited if programming is complete.
To access another feature
Press and release the valet/program button the number of times necessary to advance from the feature you just
programmed to the next one you want to program.Then press the valet/program button once more and hold it.
For example, if you just programmed the second feature and you would like to program the seventh feature in the
menu, you would: Press and release the valet/program button five times. Then press it once more and hold it.
The siren would chirp seven times to confirm access to the seventh feature.
To exit the learn routine
Do one of the following:
1. Close the open door.
2. Turn the ignition on.
3. No activity for longer than 15 seconds.
4. Press the valet/program button too many times.
To Next Page
Loading...
