EasyManua.ls Logo

Automatic Technology GDO-6v4 EasyRoller - Important Safety Checks; Installation and Operation Safety Checks

Automatic Technology GDO-6v4 EasyRoller
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
34
GDO-6v4 EasyRoller
®
Owner Installation Instructions
Please refer to the risk assessment table below and ensure all the necessary controls are in place.
Installation Risk Assessment
Hazard Control
Muscular strain from incorrect
lifting of opener
Practice correct lifting techniques (carton weighs 9 kg)
Muscular strain from incorrect
lifting of door
Practice correct lifting techniques when required to lift the door as
per installation instructions
Entanglement in operating Opener Never plug in and operate prior to installation
Uncontrolled spring tension
release
Follow the installation instructions
Ensure the U-bolt on the opposite end to the motor is tight
Do not conduct any door repairs or maintenance (contact
professional for all door servicing)
Fall from ladder Ensure ladder is the correct type for job
Ensure ladder is on fl at ground
Ensure user has 3 points of contact while on ladder
Crush injury from unsecured door Place a 2 metre exclusion zone around area under the door while it is
unsecured
Do not move under door while on door support (or ladder)
Follow the installation instructions
Fit door support (or ladder) snugly under door before removing U-
bolt and bracket
Ensure door support (or ladder) is on fl at ground
Testing and Operation Risk Assessment
Hazard Control
Entrapment under operating door Keep children clear of operating door
Ensure the garage door is in good working order
Correctly set the Safety Obstruction Force
Install Photo Electric Beams (recommended)
Do not operate door when persons are near the door
Entanglement in moving door Fit locking bar covers
Keep hands and loose clothing clear of door and guides at all times
Entanglement in operating Opener Never plug in and operate prior to installation
Electrocution Place opener in protected area so that it does not get wet
Do not spray with water
Do not open the protective covers
Do not operate opener if cable is damaged
Important Safety Checks

Related product manuals