Autronica Autroprime - 1 Introduction; About the Handbook; The Reader

Introduction
Connecting Loop Units, Interactive Fire Detection Systems, 116-P-CONNECTLOOPUNIT/DGB 2007-10-10,
Autronica Fire and Security AS
Page 3
1. Introduction
1.1 About the Handbook
This document provides information on how to connect detectors and
other loop units to the Interactive Fire Detection Systems Autroprime
and AutroSafe.
Note that some loop units can be connected to AutroSafe only (the
indication “AutroSafe only” is written in the beginning of these
chapters).
For more detailed information on loop units, refer to the datasheet for
each specific unit.
1.2 The Reader
This handbook is intended for technical personnel.