Autronica Autroprime Connecting

Connections to Other Loop Units
Connecting Loop Units, Interactive Fire Detection Systems, 116-P-CONNECTLOOPUNIT/DGB 2007-10-10,
Autronica Fire and Security AS
Page 31
3.23 Remote Alarm Control Unit (BU-200)
Applies to AutroSafe only.
The Remote Alarm Control Unit is used for remote / local alarm
handling from predefined areas / zones. The main purpose of the unit
is to facilitate alarm handling without disturbance of people and
unnecessary calls to rescue services, for example, the fire brigade.
The unit can send acknowledgement and reset to the Control Panel
(BS-310/320/330). The Remote Alarm Unit is connected to the
detection loop. Each loop unit can be connected to one Operation
Zone. An Operation Zone can have one or more units, but requires
separate 24V DC power.
PRESS HERETRYKK HER
KNUS GLASSET
BREAK GLASS
BW-200
BN- 320
BRANNALARM
Tilpasningsenhet
FIRE ALARM
Interface unit
Nr.
No.
Loop
Driver
Module
24VDC
PRESS HERETRYKK HER
KNUS GLASSET
BREAK GLASS
BW-200
BN- 320
BRANNALARM
Tilpasningsenhet
FIRE ALARM
Interface unit
Nr.
No.
BN- 320
BRANNALARM
Tilpasningsenhet
FIRE ALARM
Interface unit
Nr.
No.
Loop
Driver
Module
24VDC
BU-200

Autronica Autroprime Specifications

General

Brand	Autronica
Model	Autroprime
Category	Fire Alarms
Language	English