Autronica AUTROSAFE 4 - Power Commissioning; Addressing Power Boards on the AutroFieldBus; Switch Settings on Power Board BSF-400

Power Commissioning
Commissioning Handbook, AutroSafe Interactive Fire Detection System, Release 4, 116-P-ASAFE-COMMISS/EGB Rev.F, 2014-04-01,
Autronica Fire and Security AS
Page 11
5. Power Commissioning
5.1 Addressing Power Boards on the AutroFieldBus
5.1.1 Switch Settings on Power Board BSF-400
The board is configured by means of two switches:
 Rotary switches X10 and X11 - AutroFieldBus address switch.
Each Power Board is given a unique address.
 Dipswitch S5/S6 – configuration (refer to dipswitch table, chapter
5.1.4)
5.1.2 Location of Switches
The location of the dipswitch S5 and S6, plus the rotary switches X10
and X11 are shown on the drawing.