Autronica AUTROSAFE 4 - Configuration Missing

Startup Procedure
Commissioning Handbook, AutroSafe Interactive Fire Detection System, Release 4, 116-P-ASAFE-COMMISS/EGB Rev.F, 2014-04-01,
Autronica Fire and Security AS
Page 28
8.3.3 Configuration Missing
If no configuration has been uploaded to the system previously, the
message “Config Missing” will be shown.
Autrosafe software version 4.5.0
Config model 4.5
Market version: Land
Switch address 01-001
Searching for panels, found 2
BS-420 01.01: 4.3.1 Commiss. Star
BU-420 01.01: 4.3.1 Commiss. Star
Config missing
1. Import config from USB stick
2. Reboot all panels