Autronica AUTROSAFE 4 User Manual

Startup Procedure
Commissioning Handbook, AutroSafe Interactive Fire Detection System, Release 4, 116-P-ASAFE-COMMISS/EGB Rev.F, 2014-04-01,
Autronica Fire and Security AS
Page 33
8.6 Configuration Mismatch
If the system has an existing configuration, and the new configuration
you have uploaded does not match the installation in question, the
message “Config Mismatch” will appear.
If the software to be used is not supported by the config model, the
message “Config Model Mismatch” will appear (see screenshot
below).
The “Config Faulty” message will appear if the configuration files for
some reason are corrupt.
The “Config Market Mismatch” message will appear if the panel does
not match the market that has been selected in the configuration.
Autrosafe software version 4.5.0
Config model 4.5
Market version: Land
Switch address 01-001
Searching for panels, found 2
BS-420 01.01: 4.3.1 Commiss. Star
BU-420 01.01: 4.3.1 Commiss. Star
Config model mismatch
Verify Config
3. Upgrade software 4. Upgrade config
6. Reboot panels

Autronica AUTROSAFE 4 Specifications

General

Brand	Autronica
Model	AUTROSAFE 4
Category	Measuring Instruments
Language	English