Autronica AUTROSAFE 4 - Example 4: Adding a Panel with SW Version 4.3.1 to a System Running on SW Version 4.1.1

Commissioning Handbook, AutroSafe Interactive Fire Detection System, Release 4, 116-P-ASAFE-COMMISS/EGB Rev.F, 2014-04-01,
Autronica Fire and Security AS
Page 45
10.8.4 Example 4: Adding a Panel with SW Version 4.3.1 to a
System Running on SW Version 4.1.1
A system is running on software version 4.1.1. A new panel with
software version 4.3.1 installed is going to be added.
 Start the system without connecting the new panel to the AutroNet.
 Upgrade the system to run version 4.3.1 by using a USB stick.
 Connect the new panel to the system AutroNet.
 Restart the system and upgrade the new system configuration data
by using an USB stick.