14
4.6.21. Bluetooth communication
Bluetooth frequency band from 2402 MHz to 2480 Mhz.
Menu Setting Function Possible settings Default setting
Mode
Activation/deactivation of
Bluetooth communication.
ON
OFF
ON
Pairing
devices near the electronics
unit (within 60 seconds).
connected devices.
-
Reset
Deletion of the network linking
the electronics unit to the
connected devices.
When updating the electronic unit software via Bluetooth, the 2 LEDs (red and green) flash alternately.
4.6.22. Chlorination Test
This test is for use by professionals when carrying out maintenance operations on the equipment.
Menu Navigation
-time timer countdown
(Wait a few seconds)
or
or
Intensities and voltages supplying the cell, on each direction of
polarity inversion (values for illustrative purposes only).
4.6.23. Settings reset
Menu Important warning
I
Resetting the settings cancels all the settings carried out (factory configuration).
Press and hold.
OK
OK