AVANT e5 - Personal Safety and Protective Equipment

Avant e5
12
Personal safety and protective
equipment
Wear safe clothing and personal protective
equipment.

Protect yourself against work hazards like noise,
ejecting debris or dust for example.

Follow regulations regarding protective
equipment. Wear eye protection and hard hat or
other protective equipment as needed.

Read Operator's Manual of the attachment for
more information about protective equipment
needed in the work.

The noise level at the driver's
seat may exceed 85 dB(A).
Wear hearing protection while
working with the loader.

Wear protective gloves.

Wear safety boots whenever
working with the loader.

Wear safety glasses when
handling hydraulic components.

Always fasten seat belt while
operating the machine.

When working at construction
sites, a safety helmet is
recommended and may be
mandatory in addition to the
falling objects protective
structure (FOPS) on the loader.

Depending on work and working
area, also a respirator mask may
be required. Find out about other
necessary safety equipment at
your specific work site.
CAUTION
Silica dust warning. Prolonged
exposure to crystalline silica can
cause a lung disease called
silicosis. Occupational health and
safety officials recommend limiting
exposure to dust that is present at
most earth-moving and many other
work sites. Avoid spreading of dust
where possible, keep loader cabin
clean from dust, use respiration
mask when necessary.
Safety frame (ROPS) and safety
canopy (FOPS)
The loader is equipped with a Rolling Over Protective
Structure (ROPS) and a Falling Object Protective
structure (FOPS). These safety structures are
important parts of operator safety, and they must be
fitted on the machine.
Safety frame (ROPS) protects the operator in case
the machine tips over. Fasten seat belt while
operating a machine with a ROPS. All cab versions
are ROPS & FOPS tested and certified.
Crushing hazard - Always keep safety structures
installed
WARNING
Never take off the safety
structures, modify them, or attempt
to repair. If damaged, contact
service.
Always fasten the seat belt in order
to stay inside the protected area of
the safety frame.
Modifications
Any modification to this machine must be approved
beforehand by an authorised Avant representative. If
you modify the loader or attachment, it can become
dangerous and cause serious injuries or even death.
Unauthorised modifications can increase the risk of
accidents and damage or shorten the service life of
the machine. Modifications to electric systems can
make the no longer compliant with regulations
concerning electromagnetic emissions. Use only
original spare parts to make sure that the product is
kept in safe operating condition.
https://tractormanualz.com