Avant e5
37
.
Lights
Work lights
The loader is equipped with standard work lights at
the front of the loader, which are controlled with a
switch near the ignition switch.
If the loader is equipped with the optional road traffic
light kit, the standard work lights are replaced with
road headlights.
Extra work light kit (option)
The loader can be equipped with extra work lights,
making it easier to work in low light. The lights are
operated with the switch on the control panel
Switches on the panel.
Warning beacon (option)
The beacon can be removed quickly by loosening its
retaining screw and then by pulling the beacon out.
Place the protective seal on the beacon stand to
prevent water entering and damaging the
connectors. Handle beacon with care. The beacon is
sealed and its inner components cannot be replaced
or repaired by user.
Beacon includes high-voltage
components. Do not use or repair
damaged beacon, replace with new
one.
To Next Page
Loading...