EasyManua.ls Logo

AVANT e5 - Starting the loader

Default Icon
96 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Avant e5
44
.
Starting the loader
Before starting the loader do the daily checks. See
page 73.
Adjust the seat and mirrors (if fitted) so that you have
a good working position and unrestricted field of
vision from the driver’s seat. Check that all controls
function correctly. See to it that the operating area is
safe.
Make sure you have all operating manuals available.
Read and follow all operating and safety instructions.
WARNING
If auxiliary hydraulics is switched
on during starting and there is a
hydraulically operated attachment
on the machine, the attachment
can move suddenly and cause a
dangerous situation.
Make sure that the
auxiliary hydraulics control
lever is in neutral position
during starting.
Do not actuate the
auxiliary hydraulics control
buttons on the joystick
when starting (if fitted).
The e5 loader will not start in either
of the following conditions
Electric motors will not start if
driver is not seated on driver's
seat.
When the ignition switch is
switched to position ON,
motors will start as soon as
driver is seated on the seat.
Drive functions are disabled if
either drive pedal is depressed
during start. Drive function is
enabled after release of
pedals.
.
Ignition key
The ignition key controls both the operation of the
loader and the main battery disconnect switch.
Turning the ignition switch beyond the position ON is
possible, but unnecessary.
.
..
WARNING
Prevent unintended movements
of the loader. Keep hands and
feet away from other controls of
the loader while starting. A fault
code will appear if you press a
pedal during start of the loader.
WARNING
Misuse can be dangerous -
Prevent unauthorised use,
remove key. Powerful loader and
its attachments can be dangerous
in the hands of an inexperienced
temporary operator. Take the key
with you to prevent unauthorised
use of the equipment.
To operate the auxiliary hydraulics
or drive pedals, you must be
seated on the driver's seat. Safety
system prevents use of hydraulic
systems, unless seated on the
seat. If you use an attachment that
is controlled from other position
than the driver's seat, see page
46.
.
..
https://tractormanualz.com

Table of Contents