Avant e5
75
.
Maintenance schedule
Following tables show the maintenance and service points and intervals of the loader. There are more detailed
instructions about each service operation, in numerical order, on the following pages.
Grease the greasing points
Check tightness of bolts, nuts and hydraulic fittings
Check hydraulic oil level
Change hydraulic oil filters
Clean cooling fans and surfaces
Adjust or replace the slide pads of telescopic boom
Check pressure of hydraulic system
Adjust pressure of hydraulic system
1.
Depending on operating conditions. Daily check may be needed
2.
Check slide pads 1 to 4 on the boom
3.
Adjust or replace slide pads 1 and 2
4.
Check all slide pads and replace if necessary
Refill battery water level
Check battery visually
Check all cables and
insulators
Check battery capacity and
all individual cells
https://tractormanualz.com