EasyManua.ls Logo

AVANT e5 - Tyres; Wheel Spacers

Default Icon
96 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Avant e5
25
.
Tyres
The loader can be equipped with different type of tyres for different operating conditions. Grass pattern (GR) tyres
will damage the ground surface less than tractor (TR) tyres, but provide less traction.
Tyre
Tread
pattern
Code
Fill
pressure
Fits with fenders
Fits with snow chains
Front
Rear
SD
HD
27 x 8.50-15"
TR
65414
4,2 bar
-
-
65723
-
23 x 8.50-12"
TR
65995
3,4 bar
x
x
64746
64455
23 x 8.50-12"
GR
65994
4,6 bar
x
x
64746
64455
23 x 10.50-12"
TR
65997
2,5 bar
x
x
-
64745
23 x 10.50-12"
GR
65996
3,0 bar
x
x
-
64745
26 x 12.00-12"
TR
65739
3,4 bar
x
x
-
64973
26 x 12.00-12"
GR
65212
3,4 bar
x
x
-
64973
320/60-12" HD
TR
65224
4,0 bar
x
x
-
65603
26.5 x 14.00-12"
TR
65787
1,8 bar
-
-
-
-
* When using the 26,5x14.00-12" tyres (code 65787), use of 40 mm wheel spacers is mandatory to fit these tyres.
See more information below.
For the best stability and controllability, always use
the largest tyres possible. Tyres that are narrower
than the standard tyres are intended for special
purposes only with width restriction on the machine.
Use only tyres and rims that meet the original
specifications and dimensions to avoid potential
issues with load capacity, tyre size, or bearing load
on drive motors. Special tyres, such as studded
wheels may also be available. Consult your dealer
for further information.
Use widest tyres possible
WARNING
Risk of tipping over - Make sure
tyres are not damaged. Loss of
tyre pressure can cause loader to
tip over. Make sure there are no
visible damages on tyres. Keep
tyre pressure within
recommendations.
Wheel spacers
The wheels can be fitted with spacers that increase
the width of the loader for better stability. The
spacers A417486 are 40 mm thick. They must be
installed in order to fit the wide 26.5x14.00-12" tyres.
WARNING
Wheel spacers improve the lateral
stability of the loader. Do not
remove the wheel spacers unless
operating the loader on flat areas,
where the total width of the loader
must be reduced to as narrow as
possible.
https://tractormanualz.com

Table of Contents