Avaya 1140E - Page 125

Configuring the Avaya 1140E IP Deskphone
125
To switch between a wired headset and a wireless headset:
To unpair a wireless headset:
1. Double-press the Headset key to open
the Bluetooth Setup dialog.
2. Press the Left/Right navigation key to
select the Use BT Headset item.
3. Press the Enter key to toggle this option
on or off.
A check mark indicates that the wireless
headset is used. Clear the check mark to
use a wired headset. This option is on
(o) by default.
1. Double-press the Headset key to open
the Bluetooth Setup dialog box.
2. Press the Right navigation key to select
the Paired item.
3. If the name of your headset appears in
the Paired box, proceed to step 11.