Avaya 1600 Series - 1600 Series IP Telephone Scripts and Application Files; Choosing the Right Application File and Upgrade Script File; Upgrade Script File

H323 Telephone Installation Page 62
Issue 23e (Friday, February 15, 2019)IP Office™ Platform 11.0
Comments on this document? infodev@avaya.com
Example setup - Overview
The network is devised to allow the user PC to connect to the switch port of the IP Phone. A single cable then connects PC
and IP Phone to the Ethernet Switch. For the purpose of this example, VLAN 100 is used for voice traffic and VLAN 101 is
used for data traffic. The LAN1 interface of the IP Office control unit resides on the voice VLAN while the LAN2 interface
resides in the data VLAN. Communication between the voice and data VLANs is facilitated by the IP Office control unit's
router function.
HP-Switch - Configuration
Shown below are the web and CLI configuration output from the HP Procurve Switch. These were obtained using the
configuration guidelines found below.