H323 Telephone Installation Page 78
Issue 23e (Friday, February 15, 2019)IP Office™ Platform 11.0
Comments on this document? infodev@avaya.com
5. Alternate DHCP Server Setup
The recommended installation method for H.323 IP phones uses a DHCP server. This section outlines by example, the
basic steps for using a Windows server as the DHCP server for IP phone installation. The principles of defining a scope
are applicable to most DHCP servers.
You will need the following information from the customer's network manager:
·
The IP address range and subnet mask the H.323 IP phones should use
·
The IP Gateway address
·
The DNS domain name, DNS server address and the WINS server address
·
The DHCP lease time
·
The IP address of the IP Office unit
·
The IP address of the PC running Manager (this PC acts as a file server for the H.323 IP phones during installation)
To Next Page
Loading...
