5000 Series Switch Model Key features
• PoE
• Layer 2/Layer 3
• Stackable Ethernet switch
• 2 rack units (U) high
• Uses modular power supply units and has
three field-serviceable power supply
receptacles, which support 1000W AC or
DC power supply modules.
Common hardware features
The following hardware features are part of all 5000 Series switches:
• Two stack connectors, each operating an aggregate 80 or 144 Gbps
• Mode Select push button (formerly known as UI push button)
• LED display panel
• Console port (DB-9 connector
• Two 10/100/1000 Mbps copper Ethernet diagnostics ports
• USB 2.0 Type-A port
The following figure shows the front panel of the 5698TFD switch.
The following figure shows the rear panel of the 5698TFD switch. Not all 5000 Series switches
have a USB port on the rear panel. See
Universal Serial Bus ports on the Avaya Ethernet
Ethernet Routing Switch 5000 series models
Avaya Ethernet Routing Switch 5000 Series Installation December 2010 23
To Next Page
Loading...
