Avaya 5000 Series - Power Specifications

Connector Pin Number Signal for
10/100Base-T MDI
configuration
Signal for
10/100Base-T MDI-X
configuration
6 TX-/power- Transmit Data-/
power-
7 Not applicable Not applicable
8 Not applicable Not applicable
Power specifications
This module describes the power specifications for the power supplies in the 5500 Series.
•
Avaya Ethernet Power Supply 10 power specification on page 96
• Avaya Ethernet Redundant Power Supply 15 power specification on page 96
• Avaya Ethernet DC-DC converter module on page 97
Avaya Ethernet Power Supply 10 power specification
The following table shows the power specifications for the Avaya Ethernet Redundant Power
Supply 10 (RPS 10).
Table 19: DC power specifications
Output current 4.2 A maximum
Output voltage -48 VDC
Output power 200 W maximum
Avaya Ethernet Redundant Power Supply 15 power specification
The following table shows the power specifications for the Avaya Ethernet Redundant Power
Supply 15 (RPS 15).
Table 20: DC power specifications
Input voltage 100 to 240 VAC 50/60 Hz
Input current 10 A maximum
Inrush current 40 A maximum (regardless of ambient
temperature)
Installation reference
96 Avaya Ethernet Routing Switch 5000 Series Installation December 2010