Avaya 5000 Series - Preparing for Power Requirements of the Switch

SFP model Description Part
Number
1000Base-LX DDI SFP 1310 nm DDI LC connector AA1419049-
E5
1000BASE-BX
bidirectional SFP
1310 nm, single fiber LC (Must be paired with
AA1419070-E5)
AA1419069-
E5
1000BASE-BX
bidirectional SFP
1490 nm, single fiber LC (Must be paired with
AA1419069-E5)
AA1419070-
E5
100Base-FX SFP 1310 nm LC connector NOTE: Supported on the
5600 Series switches only.
AA1419074-
E6
XFP Model Description Part
Number
10GBase-LR/LW XFP 1-port 1310 nm SMF, LC connector AA1403001-
E5
10GBASE-ER/EW 1-port 40km, 1550nm SMF, LC connector AA1403003-
E5
10GBase-SR XFP 1-port 850 nm MMF, LC connector AA1403005-
E5
10GBase-ZR/ZW XFP 1550 nm SMF LC connector AA1403006-
E5
10GBase-LRM XFP 1310 nm, up to 220 m over MMF, DDI AA1403007-
E6
See Avaya Ethernet Routing Switch 5000 Series Installation — SFPs and XFPs -
(NN47200-302) for a list of supported SFPs and your latest product-specific release notes.
Information contained in the Release Notes takes precedence over any information contained
in this document.
Preparing for power requirements of the switch
Navigation
•
Avaya Ethernet Routing Switch 5510-24T and 5510-48T on page 37
•
Avaya Ethernet Routing Switch 5520-24T-PWR and 5520-48T-PWR on page 37
• Avaya Ethernet Routing Switch 5530-24TFD on page 38
•
Avaya Ethernet Power Supply 10 on page 38
• Avaya Ethernet Redundant Power Supply 15 on page 39
•
Avaya Ethernet DC-DC converter module on page 39
Installation fundamentals
36 Avaya Ethernet Routing Switch 5000 Series Installation December 2010