Output Current 4.2 A maximum
Output Voltage -48 VDC
Output Power 200 W maximum
Avaya Ethernet Redundant Power Supply 15
This module describes the Avaya Ethernet Redundant Power Supply 15 (RPS 15).
The RPS 15 is a DC power supply used with the AC power supply to provide DTE power to
all of the PoE ports in the Avaya Ethernet Routing Switch 5520.
Input Voltage 100 to 240 VAC 50/60 Hz
Input Current 10A maximum
Inrush Current: 40A maximum (regardless of ambient
temperature)
Output Voltage 47.5 VDC
Output Current 12.0 A
Output Power 600 W
Avaya Ethernet DC-DC converter module
This module describes the Avaya Ethernet DC-DC converter module.
The Ethernet Routing Switch 5510 requires an additional DC-DC converter module to use the
RPS 15. This module connects the RPS 15 to the ERS 5510 but is not required for other
switches in the 5500 Series. For information on connecting this module to the ERS 5510, see
DC-DC Converter Module for the Baystack 5000 Series Switch, 215081-A.
Internal power source only option
This module describes the internal power source only option.
Using theAvayal Ethernet Routing Switch 5520-PWR switch and its internal power source only
option, you have a total of 320 watts of available power. You can power up to 48 ports at 6.6
W for each port with this configuration or 20 ports at the maximum power of 15.4 W for each
port.
5500 Series power options
Avaya Ethernet Routing Switch 5000 Series Installation December 2010 39
To Next Page
Loading...
