Avaya 5000 Series - 5500 Series Power Options

Avaya Ethernet Routing Switch 5530-24TFD
This section details the power requirements of the Avaya Ethernet Routing Switch
5530-24TFD.
The following table lists the power specifications for the Ethernet Routing Switch 5530-24TFD.
Table 6: AC power specifications
Input current 1.7 A at 120 VAC or 0.85 A at 240 VAC
Input voltage (rms) 100 to 240 VAC 50/60 Hz
Typical power consumption 125 W
Typical thermal rating 427 BTU/Hr
Maximum power consumption 150W
Maximum thermal rating 512 BTU/Hr
Inrush current 20 A 120 VAC at maximum load, 40 A 240
VAC at maximum load
Turn on condition 1 second maximum after application of AC
power.
Important:
12 V output rise time, from 10 percent to
90 percent, shall be a maximum of 50 ms
and monotonic under all defined input and
output conditions.
Efficiency 70 percent minimum
5500 Series power options
This section describes the available power options for Ethernet Routing Switch 5500 Series
switches.
Avaya Ethernet Power Supply 10
This module describes the Avaya Ethernet Power Supply 10.
The Ethernet Power Supply 10 is a DC power supply used with the AC power supply to provide
DTE power to all of the PoE ports.
Installation fundamentals
38 Avaya Ethernet Routing Switch 5000 Series Installation December 2010