Avaya 5000 Series - Avaya Ethernet Routing Switch 5520-24 T-PWR and 5520-48 T-PWR

Country / Plug Specification Specifications Typical Plug
comply with the CENELEC
Harmonized Document HD-21)
United States of America / Canada /
Japan:
• NEMA5-15P male plug
• UL-recognized (UL stamped on
cord jacket)
• CSA-certified (CSA label secured
to the cord)
• 100 or 120 VAC
• 50 - 60 Hz
• Single Phase
United Kingdom:
• BS1363 male plug with fuse
• Harmonized cord
• 240 VAC
• 50 Hz
• Single Phase
Australia:
AS3112-1981 male plug
• 240 VAC
• 50 Hz
• Single Phase
Avaya Ethernet Routing Switch 5520-24T-PWR and
5520-48T-PWR
The following table outlines the RJ-45 connector pin assignments in the Avaya Ethernet
Routing Switch 5510, 5530, and 5600 Series PoE switches.
Connector Pin Number Signal for
10/100Base-T MDI
configuration
Signal for
10/100Base-T MDI-X
configuration
1 RX+/power+ Receive Data+/power
+
2 RX-/power+ Receive Data-/power
+
3 TX+/power- Transmit Data+/
power-
4 Not applicable Not applicable
5 Not applicable Not applicable
Avaya Ethernet Routing Switch 5520-24T-PWR and 5520-48T-PWR
Avaya Ethernet Routing Switch 5000 Series Installation December 2010 95