Viewing a contact's details
1. Press Contacts.
2. Select the contact you want to view.
3. Press Details to see the information available for that contact.
Selecting Details is the only way to dial a second or third number for a contact.
4. Press the appropriate softkey to call or edit this contact, delete this contact, or return
to the Contacts screen.
Adding a new contact
You can add up to six numbers for a contact. Selecting "handle" as a type allows you to track the
contact's telephone presence, for example, not logged in, logged in, in use, or sending all calls
to another number.
1. Press Contacts.
2. Press New .
3. Enter the name using the dialpad.
a. Press the number key that corresponds to the letter, character, or number you
want to enter until the character, letter or number is displayed.
b. Pause before entering the next character if the characters are on the same key.
c. To enter a space, press 0.
d. Enter remaining characters, letters or numbers.
e. Press Bksp to delete the last character.
Note:
If you want to remove a letter, number, space, or symbol that is in the middle of
the text you entered, use the left and right navigation arrows to place your
cursor after the character you want to remove. Once your cursor is in the
correct position, press Bksp to remove the character to the left of the cursor.
f. Press More > Abc to change between upper and lower case letters or to enter
numbers.
Contacts
42 Avaya one-X
™
Deskphone SIP for 9630/9630G IP Telephone User Guide November 2009
To Next Page
Loading...
