• a Web page display if the Browser is active, or
• an “interrupt” screen notifying you that you are receiving an audio alert, with
instructions for canceling the message or resuming your previous activity, such as
continuing a call.
While receiving an audio message, you can switch between the Speaker, handset, and headset
as desired, can terminate the pushed audio content by “going on-hook,” and can adjust the
volume, as you normally would during a call.
Telephone stand
Your telephone can be placed in two positions, a lower position and an upright position. You
can adjust the display screen to different angles. To move the display screen, gently pull from
the top of the display screen towards you. As you pull the screen towards you, you will hear a
clicking sound. Each of these clicks is a locking position for the display screen. Gently push
on the display screen to adjust the screen to a previous position.
If your phone is in the upright position, reverse the tab located below the switchhook in the top
ear piece pocket (on the front of the phone). This will keep the handset seated in the correct
position. You will need a small screwdriver to lift this tab out.
Introduction to the 9630/9630G SIP IP Telephone
12 Avaya one-X
™
Deskphone SIP for 9630/9630G IP Telephone User Guide November 2009
To Next Page
Loading...
