Avaya 9630 - Contacts; Searching for a contact

Chapter 8: Contacts
You can save up to 250 names and up to 6 telephone numbers per name. When you press
the Contacts button, you are automatically put into Contacts search mode.
Note:
If you press the Contacts button and nothing happens, your system administrator has
disabled the button.
Searching for a contact
You can jump to a certain group of letters in your Contacts list by pressing the associated dial
pad button. For example, if you press 3, the Contacts list might display entries starting with
3, D, E, or F depending on how you set up your contacts and how many times you press 3 in
succession. With each successive dialpad key press, the Contacts list “drills down” to display
matching entries.
Note:
On hook dialing must be disabled to allow this type of Contact search; to enable/disable on-
hook dialing, see Setting dialing options on page 17.
1. Press Contacts.
2. Using the dialpad, start typing the name for which you want to search.
Keep in mind that a Contacts search is case-sensitive and how your Contact list is
set up. If you set up your contacts as “Last Name, First Name” start typing the letters
of the last name. If you have set up your Contacts using a different scheme, type
the most likely letter(s) that would match the contact you want to find.
3. Press Call to call the person or press More then Edit to edit contact information.
Avaya one-X
™
Deskphone SIP for 9630/9630G IP Telephone User Guide November 2009 41