Entering Call Work Codes
About this task
The Call Work Code feature allows you to enter a Call Work Code, if configured by your system
administrator. The Call Work Code can be up to 16 digits in length.
To enter Call Work Codes, you must be logged in and be in one of the following states:
• Active on an ACD or DAC call
• ACW state after disconnecting from a call
• Timed ACW state after disconnecting from a call
Procedure
1. Tap Features to access the Features list.
2. From the Features list, tap Call Work Code using the up or down navigation arrows.
3. Enter the code.
4. Tap Enter or press the # key.
Result
The Call Work code is sent to the CC Elite server.
Viewing Queue Stats
About this task
The Queue Stats feature displays the following information on the deskphone screen for 10
seconds:
• The configured name of the skill group associated with the Queue Stats feature button
• Time of the oldest call in queue
• Number of calls in queue
The Queue Stats feature button label is displayed as Queue Stats followed by the skill number in
brackets; for example, Queue Stats (4).
Procedure
1. Tap Features to access the Features list.
2. From the Features list, tap Queue Stats using the up or down navigation arrows.
Result
The Queue Stats are displayed on the Agent Information line.
If VuStats is active when you press the Queue Stats feature, the Deskphone deactivates the
VuStats session when Queue Stats are received and the Agent information line is overwritten with
the Queue Stats information.
Entering Call Work Codes
August 2015 Using Avaya 9621G/9641G/9641GS IP Deskphones SIP for Call Center Agents 27
Comments on this document? infodev@avaya.com
To Next Page
Loading...
