Avaya J100 Series Partner Configuration Guide

5
Provisioning server
The Provisioning Server is an HTTP or an HTTPS server that hosts the phone firmware and configuration
files.
Files on the Provisioning Server
File name
Content
J100Supgrade.txt
Contains pointers to the firmware and upgrade files
J100setting.txt
Contains the configurable parameters that apply to all devices in a
given deployment
<MACaddress>.txt
Contains configurable parameters that apply to an individual device
in a deployment (typically the username, extension and password)
Resource files
e.g. languages, background and screen saver images, ringtones,
trust certificate files,
Phone configuration
You can configure Avaya J100 Series IP Phones to work in the 3CX environment in the following ways:
• Centralized configuration using file server
• Configuration through the web interface
Please see “Installing and Administering Avaya J100 series IP Phone in third-party call control setup” for
more information on the Configuration through the web interface.
Centralized configuration
You can bulk configure Avaya J100 Series IP Phones by using the 46xxsettings file. The phone can access
the settings file via HTTP and HTTPS.
The following configuration files must be available on the file server configured for the devices.
Avaya J100 Configuration Files
Level
Description
J100Supgrade.txt
System
Contains the device firmware load.
46xxsettings.txt
System
Contains configurable parameters that
apply to all devices in a given
deployment.
<MACaddress>.txt
Subscriber
Contains configurable parameters that
apply to an individual device in a
deployment
System Level Configuration
This section describes system-wide configuration items in the file that are
generally required for each Avaya J129 IP Phone to work with. Subscriber-specific settings are described

Avaya J100 Series Specifications

General

Category	IP Phone
Speakerphone	Yes
Connectivity	Ethernet
Power	Power over Ethernet (PoE)
Network Protocols	SIP
Display	Monochrome or Color (depending on model)