Avaya J100 Series Partner Configuration Guide

7
Step 24
SET SIP_TIMER_T4 5000
Step 25
SET ENABLE_SIP_USER_ID 1
Step 26
SET SIMULTANEOUS_REGISTRATIONS 1
Step 27
SET LOCALLY_ENFORCE_PRIVACY_HEADER 1
Step 28
SET ENABLE_STRICT_USER_VALIDATION 0
1.1.3 Configure Service Settings
Step
Command
Step 1
SET DIALPLAN [23]xxxx|91xxxxxxxxxx|9[2-9]xxxxxxxxx|7xxx
Step 2
SET NO_DIGITS_TIMEOUT 20
Step 3
SET INTER_DIGIT_TIMEOUT 5
Step 4
SET CALLFWDSTAT 7
Step 5
SET CALLFWDDELAY 1
Step 6
SET ENABLE_DND 1
Step 7
SET ENABLE_DND_PRIORITY_OVER_CFU_CFB 0
Step 8
SET ENABLE_AUTO_ANSWER_SUPPORT 1
Step 9
SET AUTO_ANSWER_MUTE_ENABLE 1
Step 10
SET HOLD_REMINDER_TIMER 0
Step 11
SET CONFERENCE_FACTORY_URI "conference@as.iop2..net"
Step 12
SET SIPCONFERENCECONTINUE 0
Step 13
SET PSTN_VM_NUM "*62"
Step 14
SET SUBSCRIBE_LIST_NON_AVAYA "message-summary"
Step 15
SET RINGTONESTYLE 0
1.1.4 Configure J100 Settings file
Step
Command
Step 1
SET ENABLE_AVAYA_ENVIRONMENT 0
Step 2
SET DISCOVER_AVAYA_ENVIRONMENT 0
Step 3
SET ENABLE_IPOFFICE 0
Step 4
SET ENABLE_3PCC_ENVIRONMENT 1
Step 5
SET 3PCC_SERVER_MODE 0
Step 6
SET SIPDOMAIN "3cx.hcm.com"
Step 7
SET TRUSTCERTS 3cx.pem
Step 8
SET SIP_CONTROLLER_LIST "3cx.hcm.com:5060;transport=tcp" (or udp,
tls)
1.2 SIP Feature Configuration
This section provides configuration instructions for SIP features supported by the phone.

Avaya J100 Series Specifications

General

Category	IP Phone
Speakerphone	Yes
Connectivity	Ethernet
Power	Power over Ethernet (PoE)
Network Protocols	SIP
Display	Monochrome or Color (depending on model)