Avaya J100 - Page 247

Parameter name Default
value
Description
PROCPSWD 27238 Specifies an access code to access
the admin menu procedures.
Valid values contain 0 through 7
ASCII numeric digits. The default
value is 27238 unless indicated
otherwise below. A null value
implies that an access code is not
required for access.
Note:
• Setting this parameter
through PPM is more secure
because this file can usually
be accessed and read by
anyone on the network.
Setting the value in this file
is intended primarily for
configurations with versions
of phone or if server
software that do not support
setting this value from the
server.
• For enhanced security, use
ADMIN_PASSWORD
instead of PROCPSWD.
PROCSTAT 0 Specifies an access code to access
the admin menu procedures.
Value Operation:
• 0: Local procedures can be used
(default).
• 1: Local procedures cannot be
used.
PROVIDE_CF_RINGTONE 0 Specifies if the call forward ringtone
option is provided to the user.
Value Operation:
• 0: The call forward ringtone
option is not provided (default).
• 1: The call forward ringtone
option is provided.
PROVIDE_EXCHANGE_CALENDAR 1 Specifies if menu items for
exchange calendar are displayed.
Table continues…
List of configuration parameters
December 2018 Installing and Administering Avaya J100 Series IP Phones 247
Comments on this document? infodev@avaya.com