•
Bluetooth (J159/J179 only) – This icon is shown if the phone supports Bluetooth headset
connection. See Using Bluetooth Headsets on page 89.
-
Headset Connected – A dot within the icon indicates that the Bluetooth headset is
connected.
•
Connection Failure – This icon indicates a connection issue.
- If the phone has lost its connection to the telephone system, then if configured by your
maintainer, after a few minutes it use a alternate system. If that is successful, an R
(Resilience) is shown in the display.
•
Missed Calls – This icon indicates that you have had missed calls. The number next to
the icon indicates the number of different callers. Pressing the button opens your call log at
the missed calls display. See
Using the Call Log on page 105.
Related links
Status Display on page 24
Status Letters
The top lines of the display can include the following status letters:
• B = Barred – The system administrator has prohibited you from making external calls. You
can only make internal calls.
• G = In Group – You have been configured as a member of a hunt group and your
membership of the group is enabled. This means you may receive calls targeted to the hunt
group. See Group Membership on page 126.
• O = Out of Service – A group of which you are a member is in night service mode. Calls to
the group are diverted to its fallback if set or otherwise to voicemail if available. See .
Group
Service Status and Fallback on page 128
• R = Resilience – Your phone is working in resilience mode. This is used when a problem
with your telephone system or the connection to it means another system is providing support
for your phone. In this mode, some features may not be available and calls may be routed
differently.
• S = System Alarm – If you are configured as a system administrator, this indicates a system
alarm. See
Reporting System Alarms on page 175.
• T = Twinned – Your phone is internally twinned with another extension. Calls to you alert on
both phones and can be answered at either. See Twinning Button on page 138.
• ! = Cannot Retrieve Settings – This indicates that the phone was not able to retrieve all you
user settings. If this happens, it may limit some telephone functions. Contact your system
administrator.
Related links
Status Display on page 24
Status Display
April 2020 J100 Series Phone User Guide 25
Comments on this document? infodev@avaya.com
To Next Page
Loading...
