Figure 87: Choosing the priority network port
2. Set the Priority setting to the GLAN port that the preferred network uses. When the routing
of a call cannot be determined by matching the destination address with the GLAN address,
it uses the preferred network port.
3. From the web interface only, select Save.
4. To define the MTU size and network speed for each port, access the advanced network
settings. From the XT Series web interface, select Administrator Settings > Networks >
GLAN1/GLAN2 > Parameters. From the endpoint's main menu, select Configure >
Advanced > Networks > GLAN1/GLAN2 > Parameters.
Figure 88: Configuring advanced network connection from the web interface
5. Set the fields as described in Table 32: Configuring network connectivity on page 136.
Table 32: Configuring network connectivity
Field Name Setting
MTU The MTU, or Maximum Transmission Unit, is the maximum size of data
packets sent around your network. This value must remain consistent for
all network components, including servers like the MCU and/or Equinox
Table continues…
Advanced Configuration of the XT Series
January 2017 Avaya Scopia
®
XT Series Deployment Guide 136
Comments on this document? infodev@avaya.com
To Next Page
Loading...
