T7316 Telephone User Guide Page 51
- Issue 02a (03 October 2011)IP Office
Logging In/Out:
9.1 Logging In on a Phone Already in Use
If you have a login code, you can login at a phone that is already in use by another user. The existing user is logged out.
1.
Dial the short code for logging in. The default is *35*N*L# where N is replaced by your extension number and L
by your login code.
9.2 Logging In on a Logged Out Phone
This method is used to login at an extension where the previous user has logged out and the phone has no current
user. You can recognize a phone in this state by Login and NoUser being shown on the display.
1.
Press the Login soft key.
2.
Enter your extension number and press #.
3.
Enter your login code and press # again.
9.3 Logout
You can only log yourself out if you have been given a login code by your system administrator. Otherwise, the only way
to be logged out is if someone else logs in on your phone. When that happens, if you are not automatically logged back in
when they log off or if you want to login over them, you can login again using the login process with a blank password .
If you have a login code, to logout dial *36.
51
To Next Page
Loading...
Need help?
General
