Avery Dennison Label Printer - Merging Information onto Your Avery Product

Avery
®
Personal Label Printer
88
• Draw Ellipse - Click this button and place the cursor where you want the ellipse to
begin. Click and drag to draw an ellipse. Release the mouse. To create a circle, hold
down the
Shift key while using this tool.
• Draw Polygon - Click this button to create polygons, polylines or freehand lines. Click
once on the label template to define the starting point. Each subsequent click defines
another point of the polygon or line. Hold down the mouse continuously to draw a freehand
line. Double-click to complete the object. If a fill color or fill pattern is selected, the start
and end point are joined automatically and the object is filled with the defined color or
pattern. If you do not want the object to close, change the Fill Color to No Color and the
Fill Pattern to No Fill Pattern. For additional information, refer to the Formatting
Objects: Fills and Lines section in Editing Your Design.
Graphic Objects: Inserting Images, Logos and Clipart
There are two ways to add images, logos or clipart to your design: selecting the Images From
File or the Clipart Gallery tools.
DesignPro supports the following graphic formats:
BMP - Windows Bitmap Format
WMF - Windows Metafile Format
TIF - Tagged Image File Format*
JPG - JPEG Format
PCX - PCX Format
EPS - Encapsulated Postscript Format
PCD - Kodak Photo CD Format
TGA - Truevision TARGA File Format
WPG - WordPerfect Graphic File Format
IMG - GEM Image File Format
*Only TIF files that do not use LZW-compression can be inserted.
To automatically create a pre-defined square or circle, click the Draw Rectangle or Draw
Ellipse button and then click once on the label template. The object can be resized as
desired.