Avery
®
Personal Label Printer
9
2. Continue following the on-screen instructions to complete the installation.
QuickStart
The Avery
®
Personal Label Printer was designed to work with genuine Avery Dennison label
rolls. One starter roll is included with the printer. Just follow these quick and easy steps:
Loading the Labels
1. Prepare the labels for loading:
• Open the Top Door of your printer by lifting it up from the front until it is
completely open.
• Prepare the label roll by removing it from the protective plastic wrap, locate the free
end of the roll and remove the tape from the end of the roll.
• Hold the label roll with the labels rolling over the top toward you.
To Next Page
Loading...
