Avery Dennison Label Printer - Printing Identical Labels; Printing Different Labels; Printing to the Edge

Avery
®
Personal Label Printer
114
Options - Opens the Print Options dialog box for additional printing selections. For more
information, refer to The Print Options Dialog Box in this section.
Printing Identical Labels
1. On the Design screen, select the label to be printed by clicking the tab to make it active.
2. Select File > Print or click on the Standard toolbar. The Print dialog box appears.
3. Select your Printer from the pull-down list box. Click Properties to check or change the
printer settings.
4. Select Master Label Only to print the Master tab design only, otherwise select Current
Selected Label.
5. For Number of Copies select either Labels or Sheets. Type the number of copies to print
for each label or sheet. For example, 10 identical labels or 5 sheets of identical labels.
6. Click a Start Position on the label preview or type a start position number.
7. Click Print Preview to view the labels before printing.
8. Click Close to return to the Design screen to make any necessary adjustments to your
design or click Print to return to the Print dialog box, then click OK to print.
Printing Different Labels
1. Select File > Print or click on the Standard toolbar. The Print dialog box appears.
2. Select your Printer from the pull-down list box. Click Properties to check or change the
printer settings.
3. Select All Designed Labels to print the entire project of different labels or select Labels to
identify and print specific labels in your project.
4. For Number of Copies select either Labels or Sheets. Type the number of copies to print
for each label or sheet. For example, 3 copies of each label or 3 sheets of the selected labels.
5. Click a Start Position on the label preview or type a start position number.
6. Click Print Preview to view the labels before printing.
7. Click Close to return to the Design screen to make any necessary adjustments to your
design or click Print to return to the Print dialog box, then click OK to print.
Printing to the Edge
If you are using a product that supports printing to the edge, do the following to ensure full
coverage of the label.