Avery
®
Personal Label Printer
72
Move Label tabs to change their order on the printed sheet. To do this, click the Label tab and
drag it along the Tab Bar to the new location. A small arrow indicates the current insert
position. Rename the Label tabs as desired.
For additional information about the Master tab and Label tabs, refer to Lesson 1 - Creating
Identical and Different Labels.
Additional Tab Bar Features
In addition to using the Master and Label tabs directly, the left side of the Tab Bar also
contains buttons for scrolling through, creating, copying, and directly selecting Label tabs.
• Navigate quickly using the Scroll Buttons.
• Type a Label tab number in the Goto Label field and press Enter to go to that Label tab.
• Click to create a New Label tab.
• Click to copy the active Label tab.
Status Bar
Located on the bottom of the Design screen, the Status Bar displays tool and object-specific
information. The following information is displayed:
• Details of the currently selected tool or command
• The Avery product number of the currently selected template
• The X and Y coordinates of the current cursor position
• The dimensions of a currently selected object
• When editing text, the line and column position of the cursor
The Status Bar is identified in the Design Screen illustration in DesignPro Quick Tour.
New Label - Click
here to create a
new Label tab
Scroll Buttons - Click these buttons to
quickly navigate through your tabs
Copy label - Click
here to copy the
selected Label tab
Goto Label - Type a Label tab
number and press Enter to go to
that tab
To Next Page
Loading...
