Avery
®
Personal Label Printer
12
• Close the Top Door and you are now ready to begin printing with your Avery
®
Personal Label Printer.
Using the Avery
®
Personal Label Printer
The Avery
®
Personal Label Printer is designed to work two ways. You can print and peel one
label at a time, or print without peeling, either one label at a time or multiple labels.
Print without Peeling Labels
To print without peeling, set the Peel Lever to its
inactive (UP) position. This keeps the peel mechanism
above the label output and allows the label to exit
freely, without peeling. If you are printing multiple
labels, the print process will prompt to print all the
labels at once or one at a time.
If the labels are misaligned, press the Print Head Release
Lever. Re-align the labels before printing, as needed.
The label guide must be down and locked while printing.
To Next Page
Loading...
