Avery
®
Personal Label Printer
2
When your Avery
®
Personal Label Printer is powered properly and the switch is in the ON
position, the Status Light Indicator button on the front of the machine will glow GREEN.
(Refer to the Printer Parts and Descriptions page)
PC Connection
The Avery
®
Personal Label Printer is designed to communicate with computers via the USB
interface. Your package includes a USB Cable for easy connection.
Plug one end of the USB Port in the rear of the printer and the other end into an available
USB Port on your computer. (Refer to the Printer Parts and Descriptions page)
Once the unit has been powered properly and connected to a computer, you are ready to load
the labels and begin printing.
If the Avery
®
Personal Label Printer drivers have not been installed, the Found New
Hardware Wizard appears. Insert the CD and refer to the section on Printer Connection
and Software Installation.
To Next Page
Loading...
