Avery Dennison Label Printer - Closing or Deactivating a Database

Avery
®
Personal Label Printer
109
5. Select Format > Bar Code Parameters to define the bar code settings. Once you have
defined the settings click OK.
For detailed information about the types of bar codes supported by DesignPro, refer to the
DesignPro Help file.
6. Click outside the bar code object to deselect it. The bar code of the first record appears on
the Master tab.
7. To view fields and move between records on the Master tab, select the bar code object.
Select Database > Display Field Contents. Then, select Database > Go To or click the
navigation buttons on the Advanced toolbar.
Closing or Deactivating a Database
Select Database > Close to temporarily unlink your project with the active database. To
restore the link of the database to your project select Database > Restore Connection. To
permanently remove the link of your project with a database select Database > Deactivate. If
If you want to code a serial number field instead of a database field, follow the same steps as
for database fields. However, instead of selecting Database > Insert Field, select Insert >
Serial Number. Define the serial number type, range, and value in the Serial Number
dialog box, then click Insert.