Avery
®
Personal Label Printer
112
Resaving or Renaming an Existing Project
To resave a project as you work, select File > Save or click on the Standard toolbar.
The existing project is overwritten by the latest version. It is always a good idea to save your
work frequently.
To resave a project with a new name select File > Save As. This is important if you want the
original project to remain unaltered. The Save As dialog box appears. Rename the project and
save it to the desired location. The new project is open and active. The original project is
closed and unaltered.
Printing Your Project
1. If printing a specific Label tab only, be sure that tab is selected and active before selecting
the Print option.
2. When ready to print, select File > Print or click on the Standard toolbar.
3. The Print dialog box appears. In this dialog box you can select, the printer, labels to be
printed, number of copies, start position on the sheet and additional print options. Review The
Print Dialog Box section below and enter the desired settings.
4. Click Print Preview to view the project before printing. Click Close to return to the Design
screen to make any necessary adjustments to your design or click Print to return to the Print
dialog box, then click OK to print.
You can also resave a file while you work by pressing Ctrl+S on the keyboard.
The term label is used throughout the DesignPro software and this manual when referring to
a variety of Avery products. Label may represent card products, name badges, dividers or
any Avery printable products.
To Next Page
Loading...
