Avery Dennison Label Printer - Insert New Graphics and Photos; Replace Existing Graphics and Photos

Avery
®
Personal Label Printer
25
Insert New Graphics and Photos
1. Follow the previous steps to Create an Individual Label.
2. Position the cursor on the label where the image is to be inserted.
3. Click Clip Art on the toolbar within the Avery
®
Assistant
TM
screen.
4. Navigate to the drive and folder where the desired graphics or photos are stored.
5. Select the graphic or photo image and click Insert.
6. The image appears on the label. Add text or edit existing text. Click Next.
7. If no additional changes are necessary, click Finish. The labels are displayed in the
Microsoft
®
Word typing screen.
8. To save a completed label project, select File > Save in the Microsoft
®
Word typing screen.
9. Navigate to the drive and folder where the label project is to be saved.
10. Type the File name and click Save.
11. Select File > Print. Change the Printer Name to Personal Label Printer from the drop
down list.
12. Click OK to print the labels.
Replace Existing Graphics and Photos
1. Follow the previous steps to Create an Individual Label.
2. Select the graphic or photo image to be replaced.
You can insert and edit images in Microsoft
®
Word using the tools and features in the
program.