Avery
®
Personal Label Printer
xii
Care and Cleaning
• WARNING! SHOCK HAZARD. To avoid injury, always disconnect power cord
from wall outlet before cleaning the machine.
• Inspect the roller for label pieces. Manually remove any pieces that are stuck to the
rollers. If adhesive residue builds up on the roller, please visit our web site at
www.avery.com/labelprinter for cleaning instructions.
• Use a NON-FLAMMABLE air duster to blow the dust from the machine parts.
• Do not insert any implements or tools into the working parts.
• If cleaning of the outer casing is required, use a damp cloth without any cleaning
fluids.
• A cleaning card is provided to clean the Print Head mechanism.
- Remove the labels from the printer. Refer to Label Removal in this section.
- Remove the cleaning card from the pouch.
- Refer to the cleaning card packet for instructions on use.
To Next Page
Loading...
