Avery
®
Personal Label Printer
31
7. Click OK.
8. The bar code and zip code number are inserted within the label design.
9. Click Next.
10. If no additional changes are necessary, click Finish. The label is displayed in the
Microsoft
®
Word typing screen.
11. To save a completed label project, select File > Save in the Microsoft
®
Word typing screen.
12. Navigate to the drive and folder where the label project is to be saved.
13. Type the File name and click Save.
14. Select File > Print. Change the Printer Name to Personal Label Printer from the drop
down list.
A red arrow will appear on the bar code if the width of the bar code is sized to a point that
scanners may not be able to read it. To fix this, increase the width of the bar code until the
red arrow disappears.
Once you leave the Avery
®
Assistant
TM
, you cannot go back to edit the label(s). Additional
formatting and editing changes can be made within the Microsoft
®
Word typing screen.
To Next Page
Loading...
